Industrial Oils

We mean Serious Business

Our service for all questions with regard to special
lubricants, industrial lubricants, metal working fluids
and forming technology :

  • Cost Reduction
  • One Contact Person
  • Increased Productivity
  • Process and Cost Guarantee
  • Higher Machine Availabilirty
  • Concentration on Your Core Tasks
About Us

Two Stroke Engine Oil:

item-1

REAL 2T Super is a two stroke engine oil developed with a suitable base oil and select additives to minimise spark plug fouling and pre-ignition. This oil prevents rusting, minimise deposit formation and provide protection against seizure, scuffing and wear. They also have advantage of lower oil consumption and contain a diluent for easy mixing with Petrol. This is recommended for all types of two stroke engines of mopeds, scooters, motorcycles and three wheelers. The recommended dosage of REAL 2T SUPER is 20 ml per litre of Petrol.

Mono Grade Engine Oil:

REAL SAE 20/30/40/50 Engine Oils are superior, heavy duty, high performance crank case oils for both Petrol / Diesel Engines. These are high viscosity index oils fortified with package additives, containing detergent, dispercent, anti-wear, anti-oxidant and anti-foam additives. Hence these oils give excellent wear protection and prevents bore polish, reduces combustion chamber deposits and oil thickening tendency to increase the oil drain intervals and thereby increases the engine life. REAL SAE 20 / 30/ 40/ 50 are SAE Grade Engine Oils are available to meet the specific requirements.

Multigrade Engine Oil:

001

REAL Engine Oils are premium quality high performance long drain engine oils for both petrol and diesel Engines. These Oils have high viscosity index with high detergency level and excellent oxidation stability. It gives excellent wear protection and good built in alkaline reserve to increase oil drain intervals and thereby increases engine life. Due to its superior quality it gives very high oil drain intervals, lower oil topping up rate and increased fuel economy.

Automotive Gear Oil:

REAL GEAR 90 / 140 EP Oils are formulated from highly refined base and selected extreme pressure additives and suitable anti-oxidants. These Oils also have excellent anti-wear and anti-rust properties. REAL GEAR 90 /140 EP Oils are recommended for hypoid, spiral bevel or worm gear transmission; differential gears of cars, trucks, busses requiring EP type lubrication. They are also suitable for meachanical transmission and drive axles operating under severe heavy duty.

REAL HYDRO 32/46/68/100/150/220/320 CIRCULATING AND HYDRAULIC SYSTEM OILS:

ANTI-WEAR TYPE : REALL HYDRO Oils are blended from highly refined chemically stable base stocks incorporated with special anti-oxidant, anti-wear, anti-rust and anti-foam additives. These Oils are anti-wear type for hydraulic and circulating systems formulated for efficient lubrication of a wide variety of Industrial and automotive equipments. REAL HYDRO Oils are recommended as fluid media for Hydraulic Systems and Hydraulic Pumps even under high pressure and high speed operating conditions in stationary and mobile equipments. These Oils are also recommended for circulation, splash, bath and ring oiling systems of the bearing both plain and anti-wear type, valves, cylinders, pistons and gears of hydraulic machinery that require a long life lubricant. They can be used for chain drives and compressor crank case lubrication. Their chemical stability ensures long trouble-free service life.

REAL HYDRO HLP 32 / 46 / 68 / 100 PREMIUM HYDRAULIC OILS:

0002

These Oils are premium grade Hydraulic Oils, having outstanding lubricating characteristics with anti-rust, anti-wear properties. These Products show low wear in vane pumpo wear test due to improved lubrication properties and have good filterability. These Oils are suitable for high pressure hydraulic systems and also for power transmission in systems operating at high speeds, loads and temperatures. These are also suitable for lubrication of pumps and industrial hydraulic machinery machinery operating under heavy loads. These Oils have very low pour point and are recommended for sophisticated high performance electrohydraulic numerically controlled systems and also for use in screw compressors, particularly in ELGI and ATLAS Cap Co make screw compressors. These Oils have excellent anti-oxidant and demulsibility characteristics.

REAL TURBINE 32/46/68/76 HYDRAULIC TURBINE OIL:

REAL TURBINE OILS are manufactured from premium quality highly refined paraffinic base stocks. They have oxidation inhibitors in addition to anti-wear additives and anti-foam additives. They exhibit highest order of oxidation stability and resistance to foaming tendency. These Oils are recommended for lubrication of steam, gas and hydraulic system requiring long life. They are also formulated to meet the requirements of turbines.

REAL SPIN 5 /10/EE10/ 12 / 22 TEXTILE MACHINE SPINDLE OILS:

001

REAL SPIN Oils are low viscosity lubricants manufactured from highly refined base stocks possessing excellent chemical and oxidation stability. These Oils are fortified further with anti-oxidant, anti-wear, anti-rust and defoaming additives. These Oils are recommended for lubrication of high speed spindles employed in textile mills and machine tools, spindle bearings, timing gears, centrifugal separators, positive displacement blowers and hydraulic systems of high precision machine tools.

REAL KABOL 32/ 56 /68 /100 / 150 /220/320 GENERAL PURPOSE LUBRICATING MACHINERY OILS:

REAL KABOL Oils are general purpose machinery Oils specially formulated with anti-rust and good oiliness additives. These Oils have oxidation and chemical stability. Since these Oils have their film forming under light and medium loads they provide protection against corrosion and rust even during the idle periods. REAL KABOL Oils are recommended for all types of industrial machinery using once through lubrication systems. These Oils are also recommended for use in the lubrication systems of machine tools, textile machinery, looms of textile machinery which are lubricated by a thin film of Oil. Heavier grades of these Oils are also used for small open gear systems under light duty conditions.

REAL GEAR EP 68/100/150/220/320/460 ( Industrial Gear Oils for Extreme Pressure Applications ):

REAL GEAR EP Industrial Oils are manufactured from high quality base stocks fortified with extreme pressure additives, anti-foam, anti-rust and anti-oxidation agents thereby they have excellent oxidation resistance and thermal stability. These Oils have phosphorous and sulphur as extreme pressure agents. REAL GEAR EP Oils are recommended for all types of enclosed gear drives with circulation or splash lubrication systems. These oils are particulrly recommended for gear sets working under heavy or shock load conditions up to operating temperatures of 80 Deg. C. to 95 Deg. C. for worm gears. These Oils are primarily used for lubrication of gears and extend its application to plain roller bearings and sliding surfaces. They are also suitable for chain drives, sprockets, flexible coupling, plain and rolling element bearings employing splash, circulation or splash lubrication systems.

REAL COMPRESS 32/46/68/100/150/220/320 COMPRESSOR CYLINDER LUBRICATING OIL:

item-1

REAL COMPRESS Oils are highly refined straight mineral oils, specially developed to provide satisfactory lubrication under prolonged high temperature and load conditions. These Oils have high oxidation stability, low carbon forming tendency and natural detergent properties. These Oils have anti-rust additives and reduces Oil consumption. REAL COMPRESS Oils are excellent cylinder lubricants for high performance reciprocating and rotary and compressor piston rings, valve etc. at even high working temperatures.

REAL VACUUM ( Vacuum Pump Oil ):

REAL VACUUM VM4 is a Vacuum Pump Oil having low vapour pressure and high thermal stability. This Vacuum Pump Oil is recommended for high vacuum producing dispersion Pumps.

REAL TOOLWAY 32 / 57 /68 /220 MACHINE TOOL WAY OILS:

0002

REAL TOOLWAY Oils are specially developed for lubrication of machine tools slide-ways to eliminate stick-slip and chatter ensuring smooth operation and high precision. These Oils have mild EP, anti-rust and anti-foam additives. The use of special tackiness agent and friction modifier ensure low oil consumption and free operation of slide ways. REAL TOOLWAY Oils are recommended for slide way lubrication in planers grinders, horizontal boring machines, shapers, jic borers, milling machines and other equipment involving precision work. These are also suitable for lubrication of all types of gears used in machine tools.

REAL CHAIN COMPOUND 100 / 200 / 400 OPEN GEAR COMPOUND:

REAL CHAIN COMPOUND 100/200/400 are open gear compounds heavily bodied, adhesive type black bituminous lubricants, fortified with special tackiness agents which reduces oil consumption. These compounds have good load carrying ability and are recommended for open gear, wire rope and chain drive lubrication. REAL CHAIN COMPOUNDS are also used for the lubrication of KILN Tyres operating at high temperatures in cement mills and chemical plants. These compounds are not suitable for food processing indu.

REAL FREEZOL 22/32/46/68/100 REFRIGERATION COMPRESSOR LUBRICATION OIL:

REAL FREEZOL OILS : are highly refined, specially treated straight mineral oils possessing high fluidity at very low temperatures, resist deposit formation and with less foaming tendency. These oils have good oxidation and thermal stability and gives long service life and reduces compressor valve maintenance due to less deposits.

REAL QUENCH 20 or 30 ( General Purpose Quenching Heat Treatment Oil ):

REAL QUENCH 20 and 30 are general purpose quenching and Heat Treatment Oils blended from selected low sulphur base stocks having excellent oxidation, chemical and thermal stability high fluidity and low volatility. They have high flash and fire points. These Oils have polar additives with good wetting characteristics to impart accelarated quenching and is recommended for general purpose fast quenching applications requiring hardening of many components such as bolts, set screws, crank shafts axles, camshafts, steering arms, brake drums, etc. REAL QUENCH 20 and 30 are recommended for components like high speed tools, ball bearings, nuts, bolts etc. These Oils can be used for quenching of components after nitriding.

REAL THERM - 20 or 30 HEAT TRANSFER FLUIDS:

REAL THERM Oils are heat transfer fluids manufactured from carefully selected base stocks. These Oils possess excellent thermal and oxidation stability, low volatility and low vapour pressure. In addition to this, they have very low sulphur content and hence most suitable to give long and trouble free service life in all types of heat transfer systems in industrial applications. REAL THERM Oils are recommended for heat transfer system operating upto 250 Deg. C. to 300 Deg. C.

REAL NEAT CUT A,C, Neat/Straight Cutting Oil - Non-Staining Inactive Type:

0008

REAL NEAT CUT – A is an inactive sulphurised cutting oil blended from specially selected high viscosity Index base stocks having oxidation and chemical stability.Chlorine and sulphurised fats are incorporated to provide Anti-weld extreme pressure and oiliness characteristics to these Oils.
REAL NEAT CUT protects the tool life and enables the use of these Oils for extreme pressure, low / moderate temperature cutting operations where feed rates are high but operative speed is low.
REAL NEAT CUT – Cprovides excellent performance in all machining operations on non-ferrous metals and can also be used for machining of ferrous metals where the severity of operation is not high. This Oil is recommended for Gear hobbing, screw cutting, tapping, milling, reaming etc., and they do not discolour the components.

REAL NEAT CUT - H NEAT HONING OIL:

REAL NEAT CUT H is a low viscosity honing Oil with excellent Lubricity characterestics and contains carefully selected anti-wear and anti-rust additives. It has the extra fluidity to ensure quick and through flushing activities ensuring very good surface finish and gives long life to the honing stones.
REAL NEAT CUT H can also be used for other operations such as turning, drilling and tapping of aluminium alloys and also for certain machining operations of ferrous, non-ferrous metals and copper alloys.

REAL COOL – S, SS GENERAL PURPOSE WATER SOLUBLE CUTTING OIL:

001

REAL COOL is a water soluble cutting oil which forms a milky emulsion and contain rust inhibitor to impart anti-rust, anti-corrosive properties and a biocide to prevent bacterial growth in the emulsion.

REAL COOL gives excellent tool life and surface finish and minimises tool wear. This Oil also gives good cooling and lubricating properties. Recommended for a variety of cutting operations on ferrous and non-ferrous metals. Mixing Ratio: Oil to water 1:20. Always oil must be added to water with continuous stirring. It does not decompose chemically, does not give objectionable odour and does not cause de-colourisation or staining. This oil does not affect the skin of the operators.

REAL Rubber Extender / Process Oil - Aromatic:

REAL RUBBER (A) is a high Aromatic Rubber Process Oil. This is Greenish brown in colour and has good solvency, making it compatible with most Rubber Polymers.
REAL RUBBER (A) finds extensive use in the manufacture of automobile tyres, tread rubber, beltings, battery cases and other rubber components where colour is not an imporant factor. This Oil is added to the polymers which may or may not have been in extended and this process oil facilitate mixing peration, reduces compounding time and improve processibility.

Rubber Process Oil - Paraffinic:

REAL RUBBER (P) is a light coloured paraffinic type, medium bodied Rubber Process Oil with good colour stability. This Oil has high flash point, high temperature properties, less sulphur content and low solvency.
These Oils are recommended as ingredients for manufacturing of various rubber products from both natural as well as synthetic rubber and also finds use in butyl and ethylene propylene rubbers. These are recommended to be used for processing of light coloured rubber goods such as white walled tyres, shoe soles, toys, sporting goods etc.

Rubber Process Oil - Naphthenic:

REAL RUBBER (N) is a Naphthenic process oil, non-staining and has fairly good colour stabibility with adequate high temperature properties. Its solvency is good and it improves the processibility of natural rubber in particular and it is suitable as general purpose rubber process oil for butyl rubber also and recommended for use in processing of rubber for the manufacture of automotive tyres, tubes, mats, footwear and many other mounded and extruded rubber goods.

REAL GREASE MP 2 or 3 GENERAL PURPOSE & ALL PURPOSE GREASE:

0009REAL GREASE MP 2 and 3 are premium quality lithium based general purpose automotive greases and they are also known as multi-purpose Greases. They have a high drop point and have excellent thermal and structural stability. They also have good oxidation stability, anti-rust and corrosion protection properties.
REAL GREASE MP 2 and 3 are recommended for the lubrication of heavy duty plain and roller bearing operations under heavy loads and shock loading conditions. These general purpose Greases are fortified with special additives and are waer repellent and can be used for water pumps plain anti-friction roller bearing, wheel bearing, chassis fitting, grease cups and universal joints and all other automotive applications.

REAL GREASE EP 0/1/2/3 LITHIUM BASED EP GREASE:

REAL GREASE EP are Lithium based Greases having extreme pressure (EP) properties. These Greases possess excellent shear stability, high load carrying capacity, high oxidation stability in addition to anti-rust and anti corrosion properties. These greases are fortified with superior additives which resist water washout and prevents seizure of moving parts caused by shock loadings. These are recommended for all industrial applications, heavy duty roller and plain bearings also under humid conditions. They also meet the requirements of a variety of applications such as automotive, earth moving equipments, gear couplings, electric motors, mining equipments and general industrial machinery.

REAL GREASE WB 2 or 3 WHEEL BEARING GREASE:

REAL GREASE WB 2 and 3 are lithium based greases having fibrous structure and have excellent performance, shear stability, and adhesive to metal surfaces. They maintain their structural stability even over long service periods and withstands withstands excessive churning operations effectively. They also possess the required consistency for pumpability for application by grease guns.

REAL GREASE WB 2 and 3 are recommended for wheel bearings, universal joints, high emperature clutch release, generator and fan bearings, and all other automotive applications where this grease is not exposed to direct water or moisture.